Ewwwww!!! Swinson AC has a the only one in captivity

Heating and Air Conditioning systems do several things to the air in your home or office:

  • Cooling
  • Heating
  • Drying
  • Cleaning

When your system is performing the first two items on that list it is easy to notice when it isn’t working. The third, drying the air, is not quite as easy to perceive.

The last item, cleaning, takes effort to discover.

You might notice dirt around the ceiling registers or dust on tabletops and furniture. Maybe you have thought about having your ductwork cleaned.

Generally, of all the dirt and mold to be found in an air conditioning system about 5% by weight (if any) is found in the ductwork. The lions share is found in the air handler or furnace, in the cooling coil and the blower wheel.

IMG_3490

Here is a coil after we took a swipe from the face with a wirebrush

IMG_3491

Here’s the wirebrush

Cleaning the blower wheel is a task that has been designed into most blower systems. It is a nut and bolt removal to the outside for cleaning and re installation. This is not the case with the indoor coil. Up until we built our ‘gadget’ cleaning the indoor coil adequately required:

  • removal of the refrigerant from the system
  • cutting of the refrigerant piping
  • removal of the coil to the outside for cleaning
  • re installation
  • nitrogen purging
  • brazing
  • evacuation
  • restart.

Our fee for this job was in the $500-600 range. It is akin to surgery on an air conditioner.

But not any more. We (well mostly Jarrod) built a machine that we have used for about 3 years that allows our technicians to clean your indoor coil while it is in place in the air handler. No opening of the refrigerant system and it takes half the time. So it’s cheaper too.

There is one brand of coil, Rheem/Ruud that it doesn’t work on as well because of the configuration of the coil design. But in the past 3 years we have saved our customers thousands of dollars with our gadget and given them a clean new coil.

Because of the high cost of the old way, many customers would just live with the dirt, reduced performance and higher utility costs.

Give us call if you have been told that your coil is dirty and needs cleaning or replacement. Heat pump air handlers start at about $280 for coil and blower, slightly higher for gas furnaces and attics.

Have your system ‘Swinsonized’!

 

 

About Swinson AC Co

Residential Air Conditioning and Heating Contractor in Central Baldwin County Alabama and the Eastern Shore 964-9009 990-0998
This entry was posted in Air Conditioning. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s